Oil Pumps, Gears, Shafts

Oil Pump Gears and Shafts

PP-AZ400

Oil pump gear set for pre-SD1
The set contains the oil pump shaft (female connector) and the oil pump idler gear. The female oil pump shaft gear is 22.2mm/0.874” long.

£29.32

PP-CX2034

Oil pump idler gear for SD1
The idler gear is 26.5mm/1.043” long.

£6.68

PP-CX2044

Oil pump shaft and gear assy for SD1
The oil pump shaft has a male connector.

£28.17

High Volume & Pressure Oil Pump Kit

This kit will cure the inherently low oil pressure and volume of the Rover pre-SD1 V8 engine. The low pressure at idle and at higher rpm starves bearings and other critical components. As the bearing, lifter bore, oil pump and other clearances wear, the std pump- which was marginal to begin with- is no longer sufficient. This kit will increase idle pressure and high rpm pressure. Raises volume 40%.

PP-AZ844

HV oil pump kit for pre-SD1 engines

£59.81

Pressure Relief Components

PP-CX2634

High pressure relief spring (MGB style)

£2.07

PP-CX2754

Pressure relief valve

£2.86

PP-DW100

Standard pressure relief spring

£2.38

Oil Pump Primer

The best way to build up oil pressure in a new engine. The distributor is removed and the primer inserted in the oil pump drive, the other end fits into your drill.

PP-DW1175

For o/pump d/shafts with ”blade” end

£19.14

PP-BY62200

For o/pump d/shafts with ”slot” end

£16.95