Shopping Cart
Items in cart : 0
Value in Cart : £0.00
If you have a query about parts it would be much appreciated if you can call between 10 and 2.30
or email anytime sales@pauls-place.co.uk
Thank you
or email anytime sales@pauls-place.co.uk
Thank you
Installation Parts
Chrome Plated Cable Brackets
Bolts onto carburetor flange ear to provide an effective mounting for the kickdown transmission cable and accelerator cable. Cables require standard GM square ends.
| PP-BY6039 | Accel cable & kickdown cable | £12.77 |
| PP-BY6038 | Accel cable only | £11.62 |
Carburetor Installation Kit
Contains-base gasket, a/cleaner gasket, manifold studs, cleaner stud, blanking caps, cable connection balls etc.
| PP-QJ141385 | Carb installation kit | £13.21 |
Rubber Blanking Caps
For blanking off unused vacuum pipes
| PP-BY3704 | Selection of Caps | £3.28 |
TH700R4 TV Cable Bracket
Bracket for Holley Carb. Corrects geometry on throttle arm for proper shifts and kickdown action. Inc bolts & instructions. for TH700R4.
| PP-QJ141580 | £16.74 |
TH200R4 & TH700R4 TV Cable Bracket
Bracket for Holley Carb. gives correct mounting point for TV cable for TH200R4 and TH700R4.
| PP-QJ140900 | Cable Bracket | £17.90 |
Holley Throttle Ball Assortment
Set of 4 different size throttle balls with nuts.
| PP-QJ141230 | Ball assortment | £9.65 |
Carb Return Spring & Bracket
Universal fit, return spring setup.
| PP-BY2085TD | Spring & black painted bracket | £4.05 |
Vacuum Advance “Switch”
Nowhere on the carb for your vacuum advance takeoff? Use this switch so that there is no vacuum at idle. Also required will be a throttle switch PP-BY15640, a fitting PP-QJ130585 and some vac advance ends & hose-
PP-CX3780, PP-CX3785, PP-CX3790.
| PP-BYAJG655 | Vacuum switch | £41.04 |
Fuel Unions
| PP-BY981360 | 3/8” Swivel for Holley 600 | £12.23 |
| PP-BY981359 | 5/16” Swivel for Holley 600 | £15.91 |
| PP-BY8089 | Edelbrock Banjo Fitting (Will not work with Holley Carb) | £11.32 |
| PP-QJ130920 | Holley 3/8” Straight (Will not work with a concave base air cleaner) | £7.37 |
| PP-QJ12940 | Holley 5/16” Straight (Will not work with a concave base air cleaner) | £8.14 |
Dual Inlet Chrome Fuel Pipes
Constructed of heavy gauge tubing, carburetor ends are double flared for safety. Accepts a 3/8” fuel hose, and has a safety bead for positive hose retention.
| PP-BY9858 | 750 vac 2nd, no secondary jet block | £19.34 |
| PP-BY9859 | 750 vac with block, & double pumpers | £18.82 |
| PP-BY97X00962 | Carb fittings for PP-BY9859 tube (each) | £8.02 |
Carburetor Mount Stud Kits
Studs, nuts & washers
| PP-BY5898 | Holley straight onto manifold | £7.60 |
| PP-BY37960 | Holley with 1” spacer | £8.22 |
| PP-BY55025K | Holley with PP-BY97 spacer | £7.45 |
Wedge Plates
Generally, the carburetor should be mounted horizontal, or parallel to the road. If the engine is mounted flat in the car, & not tail-down, you may need a wedge plate to bring the carb level.
| PP-QJ130970 | Holley 12º angle plate | £T.B.A |
| PP-QJ130965 | Holley 7º angle plate | £T.B.A |
| PP-BY65030 | Moroso 5º open angle plate | £28.27 |
| PP-BY5584 | Offe 4 hole 5º angle plate | £39.04 |
Carb Adapter Kits- to Holley 4 barrel square bore
Alum adapter, complete with-gaskets, studs, nuts and washers.
| PP-BY1932 | Q-jet & Thermo Quad sprd bore, Q-jet & Thermo Quad are- 5-5/8” x 4-1/4” bolt centres. | £15.14 |
| PP-BY2064 | Small Rochester is- 3-7/8” x 3-3/4” bolt centres on base. | £26.15 |
Moroso Carburetor Throttle Return Spring Kit
Designed and built rugged enough for competition. Polished and chrome plated. One set of heavy and one set of light springs are included. Holley carbs only.
| PP-BY64927 | Holley 4150/4160 carbs | £19.44 |
Mopar Bracket and Stud for Holley Carb
This extension bracket bolts onto the Holley lever, of most sq bore universal models. It accepts the Mopar throttle lever stud.
| PP-QJ141125 | Extension for accelerator lever | £7.32 |
| PP-QJ141130 | Throttle & cruise control stud | £17.06 |
Trans Kickdown Spring & Bracket
Sometimes called a 'spring & perch kit'. Often required on std Fords, when a Street Avenger carb is used, and the trans is auto. Only for carbs with a 30cc accel pump.
| PP-QJ141235 | Mainly used on Fords | £5.36 |
Mr Gasket Base Gaskets
| PP-BY4255G | Performance Sq bore Holley, 4 holes | £5.82 |
| PP-BY4254G | Performance Sq bore Holley, open centre | £5.75 |
| PP-BY56A | Quadrajet, open centre | £3.42 |
| PP-BY58E | Spreadbore, open centre | £3.07 |
| PP-BY55 | Square bore Holley, 4 holes | £2.89 |
| PP-BY54 | Square Bore Holley, open centre | £2.93 |
Carburetor Spacers-Aluminium
Aluminium spacers extend the length of the intake mixture column, improving distribution in the manifold. Also acts as a heat insulator. Fits Holley/Carter/Edelbrock sq bore.
| PP-BY64985 | Open centre design 1/2” | £35.31 |
| PP-BY64980 | Open centre design 1” | £38.14 |
Carb Mount Plate-covers vacuum leaks on Edel’ Performer etc
This plate is required on manifolds where the mount pad is not exactly the same shape as the carb base. Because of this you can get air leaks. Using this plate gives a sound platform for the carb to mount on. About
1/16” thick. Includes 2 gaskets.
| PP-QJ141335 | Req’ to fit sq bore carb on some manifolds | £15.37 |
Thermal Insulating Carb Spacer-Holley & Carter Sq Bore Phenolic Plastic
These spacers will help reduce the amount of heat that reaches the fuel in the carburetor. As fuel gets hotter & hotter it can get air bubbles in it, and your engine will not run at all well. Spacers are phenolic plastic & are complete with studs etc.
| PP-BY3404 | Four-hole bore design 1” | £22.34 |
| PP-BY3405 | Open centre design 1” | £21.89 |
Thermal Insulating Carb Spacer-Holley & Carter Sq Bore Aluminium
These spacers will help reduce the amount of heat that reaches the fuel in the carburetor. As fuel gets hotter & hotter it can get air bubbles in it, and your engine will not run at all well. made up of aluminium plates & gaskets. Sometimes they are used to prevent airleaks, where the carb base does not totally cover the mounting platform on the top of the inlet manifold. The Edelbrock Performer manifold is a good example of this.
| PP-BY97 | Four-hole bore design 1/4” | £14.78 |
| PP-BY86B | Quadrajet-1/2” | £21.82 |
Fuel Hose
Heavy duty, fuel hose assures high capacity fuel flow for modern hi-performance carburation.
| PP-BY1920 | 3/8” ID x 5/8” OD price per ft. | £0.94 |
| PP-BYAGF516 | 5/16” ID x 9/16” OD, price per ft. | £0.82 |
Mr Gasket Choke Cable
Features a stiff inner wire to overcome choke mechanisms that are resistant to movement, like the 600 Holley.
| PP-BY2078 | 6 ft long | £10.86 |
Address: Unit 2 Culverlands Corner, Winchester Road, Shedfield, Southampton, SO32 2JF
Phone: 01329 836260 best time to call is between 10.00 - 2.30
Open Monday - Friday 8.30 - 5.30, Saturday 8.30 - 1
Pauls Place supplying American engine parts that are stocked in the UK
