Spare & Other Parts

5.5 inch of 1/4 inch UBC threaded rod to secure the air cleaner on to the carb.[NOT Dominator].

These spacers are designed to raise up the air cleaner from the carb platform.in some applications the spacer may need filing or modifying.

A maintenance sytem,designed to recharge any washable air filter. Completely restores air flow efficiency so your air filter performs like new.

These adapters,are for use in cases where the diameter of the air cleaner platform on the top of the carb,is not 5-1/8 inch.

This Moroso nut is a better quality than some of the more simple pressed wingnuts that can be supplied with the a/cleaner.

This Ford nut is a better quality than some of the more simple pressed wingnuts that can be supplied with the a/cleaner.

This fitting bolts onto the bottom air cleaner pan,on the outside. Normally, it would then be connected to a piped rocker cover breather.On the other rocker cover there would be a PCV valve connected to the carb PCV port. With stud. Approx .800inch OD.

In cases where two piped breathers are being used,you may be able to use this Y piece to join the two breathers to the PCV fitting on the air cleaner.5/16 inch +1/2 inch.

Made to increase engine performance by improving the air flow in the carburetor.This item is designed to fit most Holley 4 barrel carbs,&provide a real performance boost.It can be used in conjunction with some 14 x 3 inch air cleaners, provided there is adequate (2 inch min))clearance between the stack and the air cleaner top.tests with a 780 Holley carb have shown this unit to increase airflow by up to 5%over competitive products. It is made from flame retardant plastic.Will not work with spreadbore carbs.May need modifying for some air cleaner cases.

Flow plate-blends transition from the carb exit to the manifold entry. Reduces turbulence and increases airflow. Fits inside open spacers and some open plenum sq bore manifolds.

in the carburetor.This item is designed to fit most Holley 4 barrel carbs,&provide a real performance boost. It can be used This lid matches the Ford 302W retro rockers covers and sump that you will find in the Ford section.Should fit most 14 inch air cleaners.

This simple ring,used on a Projection throttle body,can sometimes increase airflow &horsepower.

Fits snugly around a 14 x 5 inch filter element. Can be cleaned in the sink or washing machine. Excellent for off-road applications. can be cut down for 14 x 3 inch.

In some cases this hose can be used to join the piped rocker cover breather and the PCV connection under the air cleaner.