14inch Round Air Cleaner / Filter

This aircleaner is designed for good airflow,and is a good choice for racing.Moroso ’s unique radiused air inlet design equalizes air pressure past the boosters for uniform air flow.Comes with mounting stud,PCV connection &wing nut.To allow the air cleaner to “sink down ” around the carburetor,,the bottom pan is deeply dished.The element is a replaceable “paper ” element..Fits a 4 barrel carb with the common 5-1/8 ” top platform..Height required from the carb platform to the top of the air-cleaner is approximately 70mm.The wing nut is clear of the top a further 7.5mm.Chrome plated steel with the Moroso name in raised letters.

This aircleaner is designed with a flat bottom to raise the installed height for additional sheet metal clearance in race cars like Nascar modifieds. Comes with mounting stud & wing nut. The element is a replaceable paper element. Fits a 4 barrel carb with the Holley Dominator 7-5/16 inch top platform. Height required from the carb platform to the top of the air-cleaner is approximately 163mm. The wing nut is clear of the top a further 5mm. Chrome plated steel with the Moroso name in raised letters.

Street or strip, combining the laminar air flow base and top design with a performance paper element. This air cleaner allows a greater amount of less turbulent air to enter the carburetor. Complete with stud and wing nut. The PCV fitting is not supplied, but can be purchased as an extra, under part number PP-BY65910090. Fits a 4 barrel with the common 5-1/8 inch top platform. Height required from the carb platform to the top of the air cleaner is approximately 64mm. The wing nut is clear of the top a further 7.5mm. Chrome plated steel with no name in the top. Will not fit Edelbrock carb with electric choke unless used with PP-BY9340 air cleaner spacer.

Edelbrock

Top off your engine with a good looking Pro-Flow air cleaner. The Edelbrock signature and styling coordinate beautifully with Edelbrock Signature Series rocker covers.These air cleaners are stamped from 18-gauge steel &triple chrome-plated for a high quality finish &great looks.Complete with wing nut & PCV fitting. The mounting stud is not supplied,but can be purchased under part number KIT 800.Fits a 4 arrel with the common 5-1/8 omch top platform. Height required from the carb platform to the top of the air cleaner is approximately 84mm, including the wing nut. Chrome plated steel with the Edelbrock name in the top. Will not fit Edelbrock carb with electric choke unless used with PP-BY9340 air cleaner spacer.If being used with an Edelbrock carb, a swivel fuel union will be required PP-BY8089.

Edelbrock

Designed to match Elite series rocker covers &breathers, Edelbrock Elite Series air cleaners have a polished,finned, aluminium top, with a matt black background.Complete with wing nut &PCV fitting. The mounting stud is not supplied, but can be purchased under part number KIT 800. Fits a 4 barrel with the common 5-1/8 inch top platform. Height required from the carb platform to the top of the air cleaner is approximately 56mm.The wing nut is clear of the top a further 12mm.Aluminium with the Edelbrock name in the top. Will not fit Edelbrock carb with electric choke unless used with PP-BY9340 air cleaner spacer.If being used with an Edelbrock carb, a swivel fuel union will be required PP-BY8089. Screws in top are fake and are plastic.

Holley

This aircleaner is a traditional looking, low restriction air cleaner. Comes with mounting stud,PCV connection &wing nut.To allow the air cleaner to “sink down ” around the carburetor, the bottom pan is deeply dished.The element is a replaceable paper element. Fits a 4 barrel carb with the common 5-1/8 inch top platform..Height required from the carb platform to the top of the air-cleaner is approximately mm.The wing nut is clear of the top a further 73mm. Chrome plated steel with the Holley name in raised letters.

This 14 inch air cleaner was originally designed to fit late model GM cars where the bonnet clearance is minimal..It features a chrome plated top with replaceable paper flame-retardant high CFM filter for maximum efficiency.Comes with mounting stud,PCV connection &wing nut.To allow the air cleaner to sink down around the carburetor, the bottom pan is deeply dished. Fits a 4 barrel carb with the common 5-1/8 ” top platform..Height required from the carb platform to the top of the air-cleaner is approximately 57.5mm. The wing nut is clear of the top a further 6mm. Chrome plated steel with no name on the top. Will need a 1/2 inch air cleaner spacer, to use this air cleaner on a Holley 390 or 600 carb. *Dimensions arrived at include a 1/2 inch a//cleaner spacer.